Day: March 18, 2022

2346-00-1, 2-Methyl-4,5-dihydrothiazole is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: 2,4,4-Trimethyl-2-oxazoline 1 (1.50 g, 13.1 mmol, 1 eq.) was placed in a 100 mL flask, followed by dried THF (76 mL) and triethylamine (3.11 g, 30.6 mmol, 2.33 eq.). At ice bath temperature, (CF3CO)2O (6.52 g, 30.7 mmol, 2.34 eq.) was added dropwise over 23 min. The resulting suspension was refluxed for 5 h under nitrogen. Rotary evaporation was used to remove the solvent. Dichloromethane (30 mL) and saturated NaHCO3 (40 mL) were added to the residue and the mixture was stirred for 10 min. The organic layer was washed further with water (2 .x.40 mL). The organic layer was dried over anhydrous Na2SO4. After concentrating by rotary evaporation, the crude product was purified by flash column chromatography over silica gel, using mixed ethyl acetate/hexanes (2 : 1 volume ratio) as the eluting solvent. A white solid (1.34 g, 6.40 mmol) was obtained, yield 48.8percent.

2346-00-1, As the paragraph descriping shows that 2346-00-1 is playing an increasingly important role.

Reference：
Article; De Silva, Hondamuni I.; Song, Yingquan; Henry, William P.; Pittman Jr., Charles U.; Tetrahedron Letters; vol. 53; 24; (2012); p. 2965 – 2970;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

14779-17-0, 2-Amino-5-methylbenzothiazole is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

2, 3 a-Dichloro provided 1, 4 a-napthoquinone 1g (4. 4mmol) diethylether 30 ml a melting solution 2 a-Amino provided 6 a-methylbenzothiazole 1. 08g (6. 6mmol), triethylamine 610 micro l some excellent. 24 hours at room temperature then evaporated in pressure with respect to the stirring mixture. (Hexanes: EtOAc=20:1) column chromatography compound to formula 63 to a positive number (NQ 63) to compound obtained.Yield: 76%

14779-17-0, The synthetic route of 14779-17-0 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Chosun University Industry-Academic Cooperation Foundation; Cho, Hoon; (48 pag.)KR101761848; (2017); B1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.167366-05-4,4-Bromo-2-formylthiazole,as a common compound, the synthetic route is as follows.

A toluene (120 mL) solution of 4-bromothiazole-2-carbaldehyde (7 g, 36.50 mmol) and ethyleneglycol (2.72 g, 43.7 mmol) in a RB flask was added catalytic amount of pTsOH (0.347 g, 1.823mmol). The RB flask was attached with Dean-Stark apparatus and reaction mixture was heated to reflux for 12h. The mixture was cooled to RT, and was partitioned with saturated aqueous NaHCO3 solution. The organic layer was separated, washed with saturated aqueous NaHCO3 (2 X 120 mL) solution and then once with brine (100 mL). The organic layer was dried over anhydroussodium sulphate, filtered and the filtrate concentrated under reduced pressure. The residue was purified by combiflash chromatography (40 g Redisep 5i02 column, eluting with 20% EtOAc in pet ether) to afford the title compound 137A (8 g, 97%) as a colourless liquid. LC-MS retention time = 1.557 mm; m/z = 236.0 [M+2Hj + K1NETIX XB-C18, (3 X 75) mm, 2.6 micron column; Flow rate: 1 mL/min; Mobile Phase A: 10mM HCO2NH4in 98% Water/ 2% ACN; Mobile PhaseB: 10 mM HCO2NH4 in 2% Water/ 98% ACN; 20% B to 100% B over 4.6 mm, then hold 0.5 mm. at 20% B with flow rate 1-1.5 mL/min; Detection: UV at 254 nm. ?H NMR (400 MHz, DMSO-d6) oe 7.94 (s, 1H), 6.08 (s, 1H), 3.99 -4.08 (m, 4H)., 167366-05-4

167366-05-4 4-Bromo-2-formylthiazole 2763187, athiazole compound, is more and more widely used in various fields.

Reference：
Patent; BRISTOL-MYERS SQUIBB COMPANY; ZHAO, Guohua; DEVASTHALE, Pratik; YE, Xiang-Yang; SELVAKUMAR, Kumaravel; DHANUSU, Suresh; BALASUBRAMANIAN, Palanikumar; GUERNON, Leatte R.; CIVIELLO, Rita; HAN, Xiaojun; PARKER, Michael F.; JACUTIN-PORTE, Swanee E.; (290 pag.)WO2018/89353; (2018); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15864-32-1,2-Amino-6-bromobenzothiazole,as a common compound, the synthetic route is as follows.

General procedure: To a mixture of 6-bromobenzo[d]thiazol-2-amine (470 mg, 2.01 mmol) and CuBr2 (760 mg, 3.42 mmol) in MeCN (10 mL) at 0 C, was added iso-pentyl nitrite (280 mg, 2.41 mmol) dropwise. The reaction mixture was stirred at 0 C for 1 h and then H2O (100 mL) was added. The resulting precipitate was filtered and dried in vacuum to give the title compound (515 mg, 87%) as a brown solid., 15864-32-1

As the paragraph descriping shows that 15864-32-1 is playing an increasingly important role.

Reference：
Article; Yang, Zhaohui; Ma, Haikuo; Sun, Zhijian; Luo, Lusong; Tian, Sheng; Zheng, Jiyue; Zhang, Xiaohu; Bioorganic and Medicinal Chemistry Letters; vol. 25; 17; (2015); p. 3665 – 3670;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.59418-09-6,Methyl 4-thiazolecarboxylate,as a common compound, the synthetic route is as follows.,59418-09-6

A solution of 1-(trans-3-aminocyclobutyl)-3-cyclopropyl-1H-imidazo[4,5-b]pyrazin-2(3H)-one hydrochloride (Intermediate 79, 1.00 g, 3.55 mmol), methyl 2-chloro-4-thiazolecarboxylate (0.820 g, 4.61 mmol), and diisopropylethylamine (3.09 mL, 17.75 mmol) in DMSO (10 mL) was stirred at 120 C. for 18 h. The reaction was allowed to cool to room temperature, diluted with water and extracted with EtOAc. EtOAc was concentrated and residue purified with ISCO using silica gel column eluting with 0-70% EtOAc/hexane to give the title compound methyl 2-((trans-3-(3-cyclopropyl-2-oxo-2,3-dihydro-1H-imidazo[4,5-b]pyrazin-1-yl)cyclobutyl)amino)thiazole-5-carboxylate (0.380 g, 0.983 mmol, 27.7% yield). m/z: 387.0 (M+1); 1H NMR (400 MHz, DMSO-d6) delta: ppm 8.38 (d, J=6.46 Hz, 1H), 7.99 (q, J=3.26 Hz, 2H), 7.60 (s, 1H), 5.15 (t, J=8.31 Hz, 1H), 4.28-4.47 (m, 1H), 3.77 (s, 3H), 3.18-3.30 (m, 2H), 2.88-3.07 (m, 1H), 2.34-2.47 (m, 2H), 0.91-1.13 (m, 4H).

59418-09-6 Methyl 4-thiazolecarboxylate 2773414, athiazole compound, is more and more widely used in various fields.

Reference：
Patent; AMGEN INC.; Allen, Jennifer R.; Amegadzie, Albert; Andrews, Kristin L.; Brown, James; Chen, Jian J.; Chen, Ning; Harrington, Essa Hu; Liu, Qingyian; Nguyen, Thomas T.; Pickrell, Alexander J.; Qian, Wenyuan; Rumfelt, Shannon; Rzasa, Robert M.; Yuan, Chester Chenguang; Zhong, Wenge; US2013/225552; (2013); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15864-32-1,2-Amino-6-bromobenzothiazole,as a common compound, the synthetic route is as follows.

2. A suspension of 6-bromobenzothiazol-2-ylamine (2. 29 g, 10 mmol) prepared above in sodium hydroxide (40 mL of a 6 M solution, 240 mmol) was refluxed under argon overnight. The reaction mixture was cooled in an ice bath and was acidified to between pH 3 and 5 with conc. HCI. The resulting precipitate was isolated by filtration, washed with water and dried under high vacuum to afford the crude product that was used in the following reaction without further purification., 15864-32-1

As the paragraph descriping shows that 15864-32-1 is playing an increasingly important role.

Reference：
Patent; KINETEK PHARMACEUTICALS, INC.; WO2004/11460; (2004); A2;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

15864-32-1, 2-Amino-6-bromobenzothiazole is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of Compound 1 (500 mg, 2.18 mmol, 1 eq) and B2Pin2 (665.06 mg, 2.62 mmol, 1.2 eq) in dioxane (8 mL) was added Pd(dppf)Cl2 (159.69 mg, 218.25 mumol, 0.1 eq) and KOAc (321.29 mg, 3.27 mmol, 1.5 eq). The mixture was stirred at 110 C. for 12 hr under N2. The reaction mixture was concentrated under reduced pressure to remove solvent. The residue was diluted with brine 50 mL and extracted with EA 20 mL (20 mL*3). The combined organic layers was filtered and concentrated under reduced pressure to give a residue. The residue was purified by column chromatography (SiO2, Petroleum ether:Ethyl acetate=5:1 to 3:1). Compound 2 (907 mg, 1.55 mmol, 71% yield, 47% purity) was obtained as a light yellow solid. 1H NMR (400 MHz, CDCl3) 5=8.06 (s, 1H), 7.77-7.74 (m, 1H), 7.60 (d, J=7.2 Hz, 1H), 4.13 (q, J=7.2 Hz, 2H), 1.28 (s, 12H).

15864-32-1, 15864-32-1 2-Amino-6-bromobenzothiazole 85149, athiazole compound, is more and more widely used in various fields.

Reference：
Patent; 1ST Biotherapeutics, Inc.; LEE, Jinhwa; KIM, Jae Eun; JO, Suyeon; LEE, Gwibin; LIM, Keonseung; PARK, A Yeong; KIM, Misoon; JUNG, Gyooseung; LIM, Seung Mook; LEE, Minwoo; YANG, Heekyoung; KIM, Hyonam; KIM, Hyeongjun; LI, Wanjun; FAN, Mingzhu; (82 pag.)US2019/100500; (2019); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1025700-49-5,2-Amino-5-bromo-4-isopropylthiazole,as a common compound, the synthetic route is as follows.,1025700-49-5

Step 3 5-Bromo-4-isopropyl-thiazole; Concentrated nitric acid (4 mL) was slowly added to 5-bromo-4-isopropyl-thiazol-2-yl- amine (2.05 g, 9 mmol), and concentrated phosphoric acid (14 mL) was added dropwise over 5 min. The mixture was cooled to -5C, and a solution of sodium nitrite (0.768 g, 11 mmol) in 5 mL water was added dropwise over a 15 min period. The reaction mixture was stirred at -5C for 30 min, and an aqueous solution of H3PO2 (6 mL, 50% weight in water) was slowly added. The reaction mixture was stirred at -5C for 2.5 h, then stirred at RT for 18 h. The reaction mixture was cooled to 00C and quenched by addition of aqueous NaOH (30% weight solution). The mixture was extracted with methylene chloride, and the combined organic extracts were washed with brine, dried (MgSO/O, filtered and concentrated under reduced pressure. The resulting oil was chromato- graphed (10% EtOAc in hexanes) to give 236 mg of 5-bromo-4-isopropyl-thiazole as an oil, MS (M+H) = 207.

As the paragraph descriping shows that 1025700-49-5 is playing an increasingly important role.

Reference：
Patent; F. HOFFMANN-LA ROCHE AG; WO2008/55840; (2008); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.188937-16-8,2-(2-Thiazolyl)acetic Acid,as a common compound, the synthetic route is as follows.

Intermediate 36A: N-(3-Bromo-2-methylphenyl)-2-(thiazol-2-yl)acetamide A mixture of 3-bromo-2-methylaniline (0.764 mL, 6.20 mmol), 1,3-thiazol-2-ylacetic acid (0.74 g, 5.17 mmol) and DIEA (1.63 mL, 9.30 mmol) in DMF (15 mL) was treated with HATU (2.36 g, 6.20 mmol). After stirring overnight, the mixture was diluted with EtOAc, washed twice with 10% aqueous LiCl followed by brine, and the combined aqueous layers were extracted with EtOAc. The combined organic layers were dried and concentrated, and the residue was purified by column chromatography on silica gel, eluting with EtOAc-hexanes, to give N-(3-bromo-2-methylphenyl)-2-(thiazol-2-yl)acetamide as a white solid (0.681 g, 42% yield). 1H NMR (400 MHz, chloroform-d) delta 9.84-9.65 (m, 1H), 7.91 (d, J=7.9 Hz, 1H), 7.84 (d, J=3.3 Hz, 1H), 7.42-7.35 (m, 2H), 7.07 (t, J=8.0 Hz, 1H), 4.18 (s, 2H), 2.38 (s, 3H).

188937-16-8, 188937-16-8 2-(2-Thiazolyl)acetic Acid 21220663, athiazole compound, is more and more widely used in various fields.

Reference：
Patent; Batt, Douglas G.; Bertrand, Myra Beaudoin; Delucca, George; Galella, Michael A.; Ko, Soo Sung; Langevine, Charles M.; Liu, Qingjie; Shi, Qing; Srivastava, Anurag S.; Tino, Joseph A.; Watterson, Scott Hunter; US2014/378475; (2014); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

1025700-49-5, 2-Amino-5-bromo-4-isopropylthiazole is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3 5-Bromo-4-isopropyl-thiazole Concentrated nitric acid (4 mL) was slowly added to 5-bromo-4-isopropyl-thiazol-2-ylamine (2.05 g, 9 mmol), and concentrated phosphoric acid (14 mL) was added dropwise over five minutes. The mixture was cooled to -5 C., and a solution of sodium nitrite (0.768 g, 11 mmol) in 5 mL water was added dropwise over a 15 minute period. The reaction mixture was stirred at -5 C. for 30 minutes, and an aqueous solution of H3PO2 (6 mL, 50% weight in water) was slowly added. The reaction mixture was stirred at -5 C. for 2.5 hours, then stirred at room temperature for 18 hours. The reaction mixture was cooled to 0 C. and quenched by addition of aqueous NaOH (30% weight solution). The mixture was extracted with methylene chloride, and the combined organic extracts were washed with brine, dried (MgSO4), filtered and concentrated under reduced pressure. The resulting oil was chromatographed (10% EtOAc in hexanes) to give 236 mg of 5-bromo-4-isopropyl-thiazole as an oil, MS (M+H)=207., 1025700-49-5

The synthetic route of 1025700-49-5 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Chen, Li; Dillon, Michael Patrick; Feng, Lichun; Hawley, Ronald Charles; Yang, Minmin; US2012/22067; (2012); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica