Category: 5398-36-7

5398-36-7, Ethyl 2-aminothiazole-4-carboxylate is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of compound 1 (7.8 g, 45.3mmol), Boc2O (9.9 g, 45.3 mmol), DMAP (0.1 g, 0.82mmol) in CH2Cl2 (50 mL) was stirred at room temperature for 4 h. After completion of the reaction, the mixture was washed with H2O (30mL), brine (30 mL), the organic layer was dried over anhydrous Na2SO4, filtered and concentrated in vacuo. The crude product was purified by column chromatograph on silica gel (200-300 mesh) by ethyl acetate and petroleum ether (v/v = 1:2) as eluent to afford 2 as a light yellow solid (11.5 g, yield 93.5%).

5398-36-7, The synthetic route of 5398-36-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Li, Feng-Yun; Guo, Xiao-Feng; Fan, Zhi-Jin; Zhang, Yu-Qing; Zong, Guang-Ning; Qian, Xiao-Lin; Ma, Liu-Yong; Chen, Lai; Zhu, Yu-Jie; Tatiana, Kalinina; Morzherin, Yury Yu.; Belskaya, Nataliya P.; Chinese Chemical Letters; vol. 26; 10; (2015); p. 1315 – 1318;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

5398-36-7, Ethyl 2-aminothiazole-4-carboxylate is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 1 Preparation of ethyl 2-chlorothiazol-4-carboxylate 17 g (100 mmol) ethyl 2-aminothiazol-4-carboxylate (Example 30, step 1) was added to 150 ml acetonitrile, and 18.5 g (110 mmol) dihydrated cupric chloride was added, and then, with mechanical stirring, 18.5 ml (130 mmol) isoamyl nitrite was slowly added dropwise, followed by continuing the reaction for 4 hr after complete of addition. To the resulting mixture, ethyl acetate and water were added, filtered to remove insoluble solids, and the layers were separated. The aqueous phase was further extracted with ethyl acetate, the resultant organic phases were combined, dried over anhydrous sodium sulfate, filtered, and concentrated to obtain 16 g of an oily liquid 1H NMR (CDCl3) 1.39-1.43(3H,t, J=7.0Hz); 4.40-4.44(2H,m, J=7.0Hz); 8.08(1H, s).

5398-36-7, 5398-36-7 Ethyl 2-aminothiazole-4-carboxylate 73216, athiazole compound, is more and more widely used in various fields.

Reference£º
Patent; Beijing Molecule Science and Technology Co., Ltd.; EP2039686; (2009); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

5398-36-7, Ethyl 2-aminothiazole-4-carboxylate is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step A. A solution of 2-amino-4-ethoxycarbonylthiazole (1 mmole) in 1,4-dioxane (5 ML) was treated with di-tert-butyl dicarbonate (1.2 mmole), TMEDA (0.1 mmole) and DMAP (0.1 mmole) at room temperature.. After the reaction was stirred for 20 h, it was evaporated to dryness.. The residue was subjected to extraction to give 2-[N-Boc(amino)]-4-ethoxycarbonyl thiazole as a yellow solid., 5398-36-7

As the paragraph descriping shows that 5398-36-7 is playing an increasingly important role.

Reference£º
Patent; Metabasis Therapeutics, Inc.; US6756360; (2004); B1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

5398-36-7, Ethyl 2-aminothiazole-4-carboxylate is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,5398-36-7

To a solution of ethyl 2-aminothiazole-4-carboxylate (100 g, 581 mmol) and copper (II) bromide (195 g,871 mmol) in acetonitrile (1000 ml) at 0 C, tert-butylnitrite (104 ml, 871 mmol) was added dropwise. The reaction mixture was warmed to room temperature and stirred for 12h. After completion of thereaction, the reaction mixture was diluted with a mixture of ethyl acetate (1000 ml) and water (3000 ml) and then acidified to pH 2 using iN hydrochloric acid. The two layers were separated and the aqueous layer was again extracted three times with ethyl acetate (500 ml). The combined organic layers were dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure. The crude product was purified by recrystallization from hexane to obtain pure ethyl 2-bromo-1,3-thiazole-4-carboxylate (115 g,84% yield).?H-NMR (400 MHz, DMSO-d6) 8.52 (s, IH), 4.29 (q, J 7.1 Hz, 2H), 1.29 (t,J 7.1 Hz, 3H)MS: m/z235.90. [M+1].

As the paragraph descriping shows that 5398-36-7 is playing an increasingly important role.

Reference£º
Patent; PI INDUSTRIES LTD.; SHANBHAG, Gajanan; DODDA, Ranga Prasad; KAMBLE, Ganesh Tatya; KALE, Yuvraj Navanath; RENUGADEVI, G.; MANJUNATHA, Sulur G; S.P., Mohan Kumar; AUTKAR, Santosh Shridhar; GARG, Ruchi; VENKATESHA, Hagalavadi M; MAVINAHALLI, Jagadeesh Nanjegowda; KLAUSENER, Alexander G.M.; (161 pag.)WO2018/193387; (2018); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

5398-36-7, Ethyl 2-aminothiazole-4-carboxylate is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,5398-36-7

To 40 ml of an aqueous solution of 4.00 g (23.2 mmol) of ethyl 2-aminothiazole-4-carboxylate was added 1.86 g (46.5 mmol) of sodium hydroxide, followed by stirring at room temperature for 5 hours. The reaction liquid was adjusted to pH 1 by the addition of concentrated hydrochloric acid, and the precipitated crystals were collected by filtration to prepare 2.84 g (yield 85%) of a target compound. 1H-NMR (CDCl3, ppm) delta 7.18 (2H, broad-s), 7.38 (1H, s). The proton of the carboxylic acid was not detected.

5398-36-7 Ethyl 2-aminothiazole-4-carboxylate 73216, athiazole compound, is more and more widely used in various fields.

Reference£º
Patent; Mitsui Chemicals Agro, Inc.; EP2319830; (2011); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5398-36-7,Ethyl 2-aminothiazole-4-carboxylate,as a common compound, the synthetic route is as follows.

The free based 2-amino-thiazole-4-carboxylic acid ethyl ester (306 mg, 1.78 mmol) and CuCl (238 mg, 2.4 mmol) were suspended in conc. HC1 (8 ml) and the mixture cooled on a salt/ice bath. A pre-cooled solution of NaNO2 (166 mg, 2.4 mmol) in water (2ml) was added over a period of 10 min. The mixture was allowed to warm to room temperature over 1 h and was stirred for a further 1 h. Water was added and the aqueous layer extracted with EtOAc (3 x 10 ml). The combined EtOAc layers were washed with brine, dried (Na2SO4), filtered and the solvent removed in vacuo to give the title compound. Yield: 251 mg, 74% ; LC/MS tr 1.06 min; MS (ES+) m/z 192,194 (M+H) ; 1H NMR (250 MHz, CDC13) 5 1.41 (t, 3H), 4.43 (q, 2H), 8.08 (s, 1H)., 5398-36-7

5398-36-7 Ethyl 2-aminothiazole-4-carboxylate 73216, athiazole compound, is more and more widely used in various fields.

Reference£º
Patent; PHARMAGENE LABORATORIES LIMITED; WO2005/80367; (2005); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

5398-36-7,5398-36-7, Ethyl 2-aminothiazole-4-carboxylate is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of ethyl 2-aminothiazole-4-carboxylate (1 g, 6.35 mmol) in acetonitrile (10 mL) and THF (10 mL) was added to a solution of t-butyl nitrite (1.3 mL, 9.52 mmol) and CUCL2 (1 g, 7.6 mmol) in acetonitrile (10 mL) and THF (10 mL) at 23 C. The reaction mixture required heating at 65 C (TLC control: 40% EtOAc-hexane) after which the mixture was cooled to room temperature, partitioned between water and ethyl acetate, the organic phase concentrated in vacuo, and purified by preparative thin layer chromatography (SIO2, 20% EtOAc-hexane) to provide the chlorothiazole ethyl ester (424 mg). This ethyl ester was converted into its carboxylic acid under typical saponification conditions known to those skilled in the art, and the latter was converted into the corresponding aldehyde as described for Intermediate 6.

The synthetic route of 5398-36-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MERCK & CO., INC.; WO2004/58702; (2004); A2;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5398-36-7,Ethyl 2-aminothiazole-4-carboxylate,as a common compound, the synthetic route is as follows.,5398-36-7

Thiazole 4b (0.439 g 2.5 mmol) was dissolved in a mixture ofCH2Cl2:THF (1:1) (10 mL). (Boc)2O (0.577 g, 2.65 mmol) and TEA (0.744 g, 7.36 mmol) were added. The mixture was refluxed for 72 h and then concentrated under reduced pressure. The residue was disolved in AcOEt, washed with HCl 5% v/v (3 x 15 mL), dried over Na2SO4, filtered and concentrated under reduced pressure. The residue was purified by silica flash cromatography AcOEt:EP (3:7). White solid. Yield 74%. 1H NMR ((CD3)2CO, 400 MHz): delta 1.33 (t, 3H,J =7.2 Hz), 1.54 (s, 9H), 4.30 (q, 2H, J = 7.2 Hz), 7.22 (s, 1H), 10.33 (s,1H). 13C NMR ((CD3)2CO, 100 MHz): delta 14.6, 28.2, 61.1, 82.2, 122.4,143.0, 160.4, 161.8.

The synthetic route of 5398-36-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Franco, Jaime; Medeiros, Andrea; Benitez, Diego; Perelmuter, Karen; Serra, Gloria; Comini, Marcelo A.; Scarone, Laura; European Journal of Medicinal Chemistry; vol. 126; (2017); p. 776 – 788;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

5398-36-7, Ethyl 2-aminothiazole-4-carboxylate is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5398-36-7, 2-Amino-thiazole-4-carboxylic acid ethyl ester (1.4 g, 8 mmol) is dissolved in acetonitrile (15 ml) and N-bromosuccinimide. (1.7 g, 9.6 mmol, 1.2 equiv.) was added in one portion. The mixture was stirred at room temp. for 3 hours, then filtered and the filtrate was evaporated. After purification on silica-gel with ethyl acetate/n-heptane as eluent, 0.71 g of an off-white solid were obtained: MS: m/e 248.9 (M-H).

As the paragraph descriping shows that 5398-36-7 is playing an increasingly important role.

Reference£º
Patent; Gubler, Marcel; Haap, Wolfgang; Hebeisen, Paul; Kitas, Eric A.; Kuhn, Bernd; Minder, Rudolf E.; Schott, Brigitte; Wessel, Hans P.; US2007/281979; (2007); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica