Tag: M.W:200-300

15864-32-1, 2-Amino-6-bromobenzothiazole is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A compound of Formula P-1 is treated with, for example, potassium thiocyanate and bromine in acetic acid to produce a compound of Formula P-2. The compound of Formula P-2 is treated with an acetylating reagent such as acetyl chloride to produce a compound of Formula P-3. The compound of P-3 is reacted with, for example, bis(pinacolato)diboron (compound P-4) in the presence of a catalyst such as palladium chloride to produce a compound of Formula P-5.

15864-32-1, The synthetic route of 15864-32-1 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; INTELLIKINE, LLC; LIU, Yi; REN, Pingda; JESSEN, Katayoun; GUO, Xin; ROMMEL, Christian; WILSON, Troy, Edward; WO2014/151147; (2014); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2941-58-4,2-Bromo-6-methoxybenzothiazole,as a common compound, the synthetic route is as follows.

To a stined solution of 2-bromo-6-methoxybenzo[d]thiazole (8.00 g, 32.8 mmol) in dichloromethane (20 mL) at 15 C was added tribromoborane (9.1 mL, 98 mmol) dropwise. The resulting mixture was heated at 40 C for 6 h then poured into ice water. The precipitate was filtered and the filtrate was extracted with dichloromethane (40 mL x 3). The precipitate and the organic layers were combined, dried over Na2504,and concentratedto give the title compound.MS: m/z = 229.9, 231.9 (M + 1). ?H NMR (400 MHz, CD3OD): oe7.74 (d, J= 8.8 Hz, 1H), 7.28 (d,J=2.4Hz, 1H),7.00(dd,J,=8.8Hz, J2=2.4Hz, 1H)., 2941-58-4

The synthetic route of 2941-58-4 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; MERCK SHARP & DOHME CORP.; STUMP, Craig A.; CHEN, Yi Heng; LIU, Ping; MENG, Dongfang; WU, Jane; LI, Chun Sing; QI, Zhiqi; (163 pag.)WO2016/161572; (2016); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

2941-58-4, 2-Bromo-6-methoxybenzothiazole is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In an 8 mL screw cap vial was added a solution of 3-benzyl-6-mercapto-5- [METHYL-LH-PYRIMIDINE-2,] 4-dione, (0.025 g, 0.1 mmol) in dimethylformamide (1 [ML),] a solution of 2-bromo-6-methoxybenzothiazole (0.15 mmol) in dimethylformamide (0.3 mL) and diisopropylethylamine (0.05 mL, 0.3 mmol). The vial was capped and the reaction mixture was shaken for 24 hours at [100C.] The solvent was removed under vacuum. Purification was carried out via reverse- phase HPLC (ODS AC-18, [5] [T,] 30 mm [X100] mm, 3% n-propanol in acetonitrile and [3%] n-propanol in water 10 % to [90%] over 10 minutes) to give 3-benzyl-6- (6- [METHOXY-BENZOTHIAZOL-2-YLAMINO)-5-METHYL-1H-PYRIMIDINE-2,] 4-dione. MS [(APCI),] m/z [( [M+H] +)] 395.1.

2941-58-4, The synthetic route of 2941-58-4 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/14868; (2004); A2;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.209459-11-0,Methyl 2-aminobenzo[d]thiazole-7-carboxylate,as a common compound, the synthetic route is as follows.

A.4.3 Synthesis of benzothiazole-7-carboxylic acid methyl ester; Isoamyl nitrite (22.0 mmol) is added to a solution of 2-amino-benzothiazole-7-carboxylic acid methyl ester (10.1 mmol) in THF (29 mL). The mixture is heated to reflux for 4h, the solvents are removed in vacuo and the residue is purified by flash chromatography (gradient: heptane to EtOAc/heptane 4/6) to give the desired product. LC-MS: tR = 0.85 min; [M+H]+ = 194.0.

209459-11-0, 209459-11-0 Methyl 2-aminobenzo[d]thiazole-7-carboxylate 10910742, athiazole compound, is more and more widely used in various fields.

Reference：
Patent; ACTELION PHARMACEUTICALS LTD; WO2009/104155; (2009); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

6294-52-6,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.6294-52-6,5,6-Dimethoxybenzo[d]thiazol-2-amine,as a common compound, the synthetic route is as follows.

To the reaction mixture of 5,6-dimethoxybenzo[d]thiazol-2-amine (50 mg, 0.238 mmol), TEA (0.100 mL, 0.713 mmol) in DCM (1 mL) was added 2-chloroacetyl chloride (0.023 mL, 0.285 mmol) at room temperature. Overnight, concentration and purification on combiflash (4 g, MeOH/DCM) gave 2-chloro-N-(5,6-dimethoxybenzo[d]thiazol-2-yl)acetamide (15 mg, 0.052 mmol, 22.00% yield). 1HNMR (400 MHz, CDCl3), 9.73 (s, 1H), 7.26 (s, 1H), 7.25 (s, 1H), 4.30 (s, 2H), 3.969s, 6H) ESI-MS: m/z 286.94 (M+H)+

As the paragraph descriping shows that 6294-52-6 is playing an increasingly important role.

Reference：
Patent; Stingray Therapeutics, Inc.; Vankayalapati, Hariprasad; Sharma, Sunil; Kaadige, Mohan Rao; Weston, Alexis; Thode, Trason; (117 pag.)US2020/39979; (2020); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

131106-70-2, 6-(Trifluoromethyl)benzo[d]thiazole is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,131106-70-2

General procedure: To an oven-dried 10 mL vial were added the heteroarene 1 (0.40 mmol, 1.0 equiv), 1-adamantanecarboxylic acid (2; 216 mg, 1.20 mmol, 3.0 equiv), K2HPO4 (209 mg, 1.20 mmol, 3.0 equiv), 9-mesityl-10-methylacridinium perchlorate (8.2 mg, 5.0 mol%), and [Co(dmgH)(dmgH2)Cl2] (11.6 mg, 8.0 mol%). After the vial was capped with a septum, it was evacuated and refilled with N2 for three times before DCE (1.5 mL) and H2O (0.5 mL) were added sequentially. If the heterocyclic substrate 1 was a liquid, it was added at this point. The mixture was degassed and stirred for 24 h under visible light irradiation (Kessil A360N, see Figure S-1 in the Supporting Information). After 24 h, the mixture was diluted with CH2Cl2 (10 mL) and H2O (10 mL), and the phases were separated. The aqueous layer was extracted with CH2Cl2 (2 × 10 mL), the combined organic phases were dried (Na2SO4), and the solvent was removed under reduced pressure. The residue was purified by column chromatography on silica gel (n-pentane or n-hexane/Et2O 20:1 to 2:1) affording the corresponding product 3.

131106-70-2 6-(Trifluoromethyl)benzo[d]thiazole 14810650, athiazole compound, is more and more widely used in various fields.

Reference：
Article; Koeller, Julian; Gandeepan, Parthasarathy; Ackermann, Lutz; Synthesis; vol. 51; 5; (2019); p. 1284 – 1292;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15864-32-1,2-Amino-6-bromobenzothiazole,as a common compound, the synthetic route is as follows.

Step 1: tert-Butyl 6-bromobenzo[d]thiazol-2-ylcarbamate A mixture of 6-bromobenzo[d]thiazol-2-amine (14.7 g, 64.2 mmol), di-tert-butyl dicarbonate (14.0 g, 64.1 mmol) and N, N-dimethylpyridin-4-amine (40.0 mg, 0.327 mmol) in DCM (200 mL) was stirred at room temperature for 24 h and then filtered. The filtrate was evaporated in vacuo. The resultant residue was purified via flash chromatography on silica gel (solvent gradient: 0-10% ethyl acetate in petroleum ether) to yield 7.26 g (34%) of the title compound as a yellow solid. LCMS (ESI): [M+H]+=329/331., 15864-32-1

15864-32-1 2-Amino-6-bromobenzothiazole 85149, athiazole compound, is more and more widely used in various fields.

Reference：
Patent; Genentech, Inc.; Braun, Marie-Gabrielle; Garland, Keira; Hanan, Emily; Purkey, Hans; Staben, Steven T.; Heald, Robert Andrew; Knight, Jamie; Macleod, Calum; Lu, Aijun; Wu, Guosheng; Yeap, Siew Kuen; (183 pag.)US2018/65983; (2018); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

15864-32-1, 2-Amino-6-bromobenzothiazole is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Iso-Pentyl nitrite (0.9 mL, 6.8 mmol) and copper (II) chloride (0.938 g, 5.5 mmol) were suspended in CH3CN (25 mL), and the mixture was stirred at 65 C. for 30 min. A solution of 6-bromobenzo[d]thiazol-2-amine (I-2) (1 g, 4.37 mmol) in THF (20 mL) was added dropwise, and the resulting mixture was stirred at 85 C. for 1 h. The mixture was allowed to cool to RT, poured into 20% HCl (200 mL), filtered, and the cake was washed with water (50 mL). The crude product was purified by flash column chromatography on silica gel (200-300 mesh) eluting with petroether/ethyl acetate (40/1) to give the desired product, 6-bromo-2-chlorobenzo[d]thiazole (701) (0.58 g, 53.7% yield) as a pale solid. ESI-MS (M+H)+m/z: 247.9., 15864-32-1

As the paragraph descriping shows that 15864-32-1 is playing an increasingly important role.

Reference：
Patent; Intellikine LLC; Ren, Pingda; Liu, Yi; Wilson, Troy Edward; Li, Liansheng; Chan, Katrina; US2015/225407; (2015); A1;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

3622-30-8, 2,4-Dichlorobenzothiazole is a thiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 164 (+)-(4aR)-(10bR)-4-methyl-8-(4-chloro-2-benzothiazolylthio)-10b-methyl-1,2,3,4,4a,5,6,10b-octahydrobenzo[f]quinolin-3-one A 15 mL round bottom flask was charged with (+)-(4aR)-(10bR)-4-methyl-8-mercapto-10b-methyl-1,2,3,4,4a,5,6,10b-octahydrobenzo[f]quinolin-3-one (100 mg, 0.38 mmol), potassium carbonate (158 mg, 1.14 mmol), 2,4-dichlorobenzothiazole (94 mg, 0.46 mmol) and 1 mL of anhydrous dimethyl formamide, fitted with a reflux condenser, and the stirred mixture was heated at 60°, under nitrogen, for 48 h. The mixture was cooled, diluted with ethyl acetate (75 mL) and washed with brine (2*25 mL). The combined organic extracts were dried over sodium sulfate, concentrated, and purified by silica gel chromatography (80percent ethyl acetate/hexanes eluent) to give 80 mg (49percent) of the title compound as an amorphous solid. mp 207°-209°. FDMS: m/e=429 alpha[D]589 =+63.86 (c=0.57, chloroform).

3622-30-8, The synthetic route of 3622-30-8 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; ELi Lilly and Company; US5629007; (1997); A;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15864-32-1,2-Amino-6-bromobenzothiazole,as a common compound, the synthetic route is as follows.

6-bromo-2-aminobenzothiazole (2.50 g, 10.7 mmol)Dissolve DMAP (1.33 g, 12.8 mmol) in 20 mL of dichloromethane.Acetic anhydride (1.23 mL, 13.0 mmol) was added dropwise on an ice bath.After stirring overnight at room temperature, pour in 100 mL of 1N HCl.The resulting solid is suction filtered, the solid is rinsed with water and dried to constant weight.A white solid (2.30 g, 79%) was obtained., 15864-32-1

The synthetic route of 15864-32-1 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Aikenuo Bio-pharmaceutical Co., Ltd.; He Sudan; Zheng Jiyue; Ma Haikuo; Zhang Xiaohu; (13 pag.)CN107753483; (2018); A;,
Thiazole | C3H3NS – PubChem
Thiazole | chemical compound | Britannica